- Home
- Welding
- Engine Drive Welding
- Hobart Champion Elite Arc Welder/Generator with 725CC Kohler Gas Engine and Electric Start — 40–225 Amp DC Output, 11,000 Watt AC Power, Model# 500562
Hobart Champion Elite Arc Welder/Generator with 725CC Kohler Gas Engine and Electric Start — 40–225 Amp DC Output, 11,000 Watt AC Power, Model# 500562
US $981.16
Doubles as an Auxiliary Power Hub
Generates the Power You Need
This multipurpose unit not only does duty as a welder, but also works hard as a generator, as well. Delivering up to 11,000 Watts of generator power, this unit is more than capable of running tools and worklights, or acting as backup power during an outage.
Multiple Outlet Access
The generator includes four 120V (20 Amp) GFCI-protected outlets, one 240V (NEMA 6-50R) 50 Amp receptacle, and one 120/240V (NEMA 14-50R) 50 Amp receptacle with pushbutton reset circuit breakers, allowing you to safely run multiple tools and accessories at once.
Dependably Powered by Kohler®
Engine-Driven Performance
This portable unit relies on a smooth 23 HP Kohler® twin cylinder, 4-cycle OHV engine to deliver exceptional performance. The engine is fully enclosed in a protective case that reduces noise for super quiet operation, and provides added weather protection for outdoor use.
Quietly Uses Less Gas
The fuel-efficient motor features an extra-large 12-gallon fuel capacity and can run up to 14 hours on a full tank of gas under a continuous load of 4,000 Watts. The auto-idle feature provides even more fuel savings and also helps to further reduce noise output.
Loaded with Handy Extras
Servicing an engine can sometimes slip through the cracks, but "no tools" oil changes make that task quicker and easier. A built-in digital hour meter also assists you in keeping current on scheduled maintenance, and sight gauges make it easy to check fluid levels.
Goes Wherever You Need It
Built to Handle Whatever You Dish Out
This heavy-duty generator/welder is the dependable mobile source you need for on-site projects. The fully enclosed engine design, large battery and rugged electrical connections and wiring are designed to handle the toughest working conditions.
Get Hooked on the Top Hanger
When the work day is done you don't want to just leave your Champion Elite unattended at the site. An extra strong, built-in top loop adds the rugged attachment point you need to lift the unit with a crane so you can load it into your truck, or store it safely elevated off the ground until it's time to punch the clock again.
Smaller, Lighter Design
The compact Hobart Champion Elite is just under 3 1/2ft. long, measuring 41in.L x 20in.W x 28in.H, and weighs less than most comparable units, making it the perfect choice for portable applications. This unit's not only easy to transport, but also easy to use once you get there!
Don't Forget the Extras
You can add an optional running gear wheel kit (Item# 42541, sold separately) to make this unit even more mobile. And don't forget, the Hobart Champion Elite requires welding cables (Item#s 628510 or 628511, sold separately) for welding operation.
Weld with Quality and Confidence
The Hobart Advantage
The Hobart Champion Elite is made in the U.S.A. and backed by Hobart's industry-leading 5–3–1 industrial warranty. You get a 5-year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes; a 3-year warranty on drive systems, PC boards, solenoid valves, switches and controls; and a 1-year warranty on plasma torches, MIG guns, relays, contactor, triggers, regulator, accessories, spoolguns, battery, field options and running gear. (90-day limited warranty for industrial use). Normal wear items such as drive rolls, contact tips, nozzles, gas diffusers, plasma torch tips, electrodes and weld cables are not covered under this warranty.
Guaranteed Satisfaction
Shop in complete confidence, knowing that Northern Tool + Equipment protects your investment and is ready to provide you with the assistance and helpful resources you need.
Features + Benefits
- Mobile source heavy-duty generator/welder
- 41in.L x 20in.W x 28in.H unit is just under 4ft. long and weighs less than most competitive units
- Portable, engine-driven solution with 23 HP Kohler twin cylinder, 4-cycle OHV engine
- Delivers up to 11,000 Watts of AC generator power to run tools, worklights or backup power during an outage
- 9,500 continuous watts power generation
- Can simultaneously deliver 150 Amps weld output and 8,000 Watts of generator power
- 100% duty cycle @ 225 Amps (DC output)
- 40–225 Amp DC output range
- Handles mild steel, stainless steel and cast iron with max. thickness of 1/2in. in a single pass
- Auto-idle for increased fuel savings and reduced noise
- Fuel-efficient model can run up to 14-hrs. on one 12-gal. tank of gas under a continuous load of 4,000 Watts
- Heavy-duty construction with fully enclosed engine design, large battery and rugged electrical connections and wiring
- Fully enclosed case design reduces noise and provides added weather protection
- Sight gauge makes it easy to check fuel levels
- Includes built-in digital hour meter to assist you in keeping current on scheduled maintenance
- "No tools" oil change and standard hour meter help maintain routine scheduled oil servicing
- Coarse and Fine amperage adjustments allow for easy fine-tuning of welder output
- Extra-large 12-gallon fuel capacity for increased runtimes
- Includes four 120V (20 Amp) GFCI protected outlets, one 240V (NEMA 6-50R) 50 Amp receptacle and one 120/240V (NEMA 14-50R) 50 Amp receptacle with pushbutton reset circuit breakers
- Required welding cables (Item#s 628510 or 628511) sold separately
- Optional running gear wheel kit (Item# 42541) sold separately
Item# | 42542 |
Brand | Hobart |
Manufacturer's Warranty | 3 year limited warranty |
Ship Weight | 499.0 lbs |
Product Type | Welder/generator |
Rated Watts (kW) | 11,000 |
Surge Watts (kW) | 11,000 |
Receptacles (qty.) | (4) 120V GFCI (20A); (1) 240V (NEMA 6-50R) 50A; (1) 120/240V (14-50R) 50A |
Circuit Breakers | Yes |
Welding Amperage Range | 40–225 DC |
Weldable Metals | Stainless steel, galvanized |
Weld Thickness (in.) | Up to 1/2 single pass |
Engine | 23 HP Kohler twin cylinder, 4-cycle overhead |
Engine Displacement (cc) | 725cc |
Gross Torque | 37.9 lbs./ft. |
HP | 23 |
Start Type | Electric |
Auto-Idle | Yes |
Fuel Capacity (gal.) | 12 |
Dimensions L x W x H (in.) | 41 x 20 x 28 |